Workman GTX Electric Page 3A -- 29 Electrical System
Light Pattern
Cause Necessary Action
12 Flashes A controller configuration
fault occurred.
Turn the key switch to the OFF position, wait several
seconds, turn the key switch to the ON position, and
check for normal vehicle operation.
If this fault continues to occur, contact your Authorized
Toro Distributor for assistance.
13 Flashes An internal controller
software fault occurred
Turn the key switch to the OFF position, wait several
seconds, turn the key switch to the ON position, and
check for normal vehicle operation.
If this fault continues to occur, contact your Authorized
Toro Distributor for assistance.
14 Flashes A controller communication
fault occurred
Turn the key switch to the OFF position, wait several
seconds, turn the key switch to the ON position, and
check for normal vehicle operation.
If this fault continues to occur, contact your Authorized
Toro Distributor for assistance.
Electrical
System
To Next Page
Loading...
Need help?
General
