Connecting
a
digital
audio
system
o
o
o
o
This connection allows you to use external speakers with an
external analog audio amplifier to adjust the sound level.
To control the audio:
1 Turn on the TV and the stereo amplifier.
2 Set up a optimum volume level
of
the stereo amplifier.
Then you can adjust the sound volume level from the
TV's
volume control
or
the amplifier's volume control.
3 Menu item
of
Speakers can turn to
OFF
to mute the
TV's
built
in
speakers.
You will need:
• standard audio cables
Analog
audio
amplifier
damage
speakers
or
headphones. THIS DAMAGE
IS
NOT
COVERED
BY
YOUR WARRANTY
•
The
DIGITAL AUDIO
OUT
terminal
may
not output some
digital audio sources because
of
copy
restrictions.
" Manufactured under license from Dolby Laboratories. Dolby and
the double-D symbol are trademarks of Dolby Laboratories.
Connecting
an
audio
system
o
o
TV
back
panel
o
o
Audio
-.
Digital Audio Selector
Audio Settings
Advanced Audio Settings
4
In
the
Optical
Output
Format
field, select either
Dolby
Digital
or
PCM,
depending on your device (I&"Selecting
the optical audio output format" on page 43).
To control the audio:
You will need:
• optical audio cable (Use an optical audio cable that has
the larger "TosLink" connector and not the smaller "mini-
optical" connector.)
1 Turn on the TV and the digital audio device.
2 Press
M~U
on the
TV's
remote control and open the
Audio
menu.
3 Highlight
Audio
Setup
and press
@.
The
TV's
DIGITAL
AUDIO
OUT
terminal outputs a
Dolby®*
Digital
~_Do~~~
or
2-channel down-mixed
peM
(pulse-code
modulation) signal for use with an external Dolby® Digital
decoder or other external audio system with optical audio
input.
Audio
Setup
PC
Audio
HDMl1
Audio
MTS
Language
No
Auto
Stereo
English
Audio
Digital Audio
Selector
Advanced Audio Settings
Audio Setup
Reset
Done
Audio
Settings
Bass
Treble
Balance
10
......
0
10 • 0
o •
-0
Note:
• Some audio systems
may
not
be
compatible with
Dolby
Digital bitstream signals. Older audio systems that are
not
compatible with standard
optical
out signals
may
not work properly; creating a high noise level that
may
Reset
Done
To Next Page
Loading...
