You
can set separate scroll settings for the TheaterWide 2 and
TheaterWide 3 modes for each input.
Scrolling
the
TheaterWide®
picture
(TheaterWide
2
and
3
only)
To
turn
off the
auto
aspect ratio feature:
Select
Off
in
step 3 above.
Selecting
the
cinema
mode
To
turn
on the
auto
aspect ratio feature:
1 Press
M~U
and open the
Video
menu.
2 Highlight
Theater
Settings
and press
@.
3 In the
Auto
Aspect
Ratio
field, select
On.
4
To
save the new settings, highlight
Done
and press
@.
To
revert to the factory defaults, highlight
Reset
and
press@.
Sports
Video
Mode
To
set the scroll settings:
1 Press
M~U
and open the
Video
menu.
2 Highlight
Theater
Settings
and press
@.
Picture Settings
Noise Reduction
Game
Mode
Off
3
In
the
Picture
Size
field, select either
TheaterWide
2or
TheaterWide
3 (you cannot scroll
in
any other mode).
4
Press'"
to highlight the
Picture
Scroll
field.
5 Press
....
or
~
to scroll the picture up and down as needed.
6
To
save the
new
settings, highlight
Done
and press
@.
To
revert to the factory defaults, highlight
Reset
and press
@.
Note:
When receiving a signal
at
480i resolution, the picture
scroll function
may
have limited adjustment range.
Using
the
auto
aspect
ratio
feature
When you view a OVO (3:2 pulldown processed) from a DVD
player connected to the
VIDEO
1,
VIDEO
2,
ColorStream
HD-1,
ColorStream
HD-2
(component video), or
HDMI
inputs on the
TV,
smoother motion can be obtained by setting the
Cinema
Mode
to
Film.
To set the Cinema Mode to Film:
(available for 480i and 1080i signals)
1 Press
M~U
and open the
Video
menu.
2 Highlight
Theater
Settings
and press
@.
3 In the
Cinema
Mode
field, select
Film.
4
To
save the new settings, highlight
Done
and press
@.
To
revert to the factory defaults, highlight
Reset
and
press@.
1
When the auto aspect ratio feature
is
set to
On,
the TV
will automatically select the picture size when one
of
the
following input sources
is
received:
• A 480i, 480p,
nop,
I080i digital signal from the
ANT/CABLE
input
• A 480i signal from the
VIDEO
1or
VIDEO
2 input
• A 480i signal from the
ColorStream
HDl
or
HD2
input
• A 480i, 480p,
nop,
I080i, 1080p, or VGA (60Hz) signal
from the
HDMI1/2/3
input
Aspect
ratio
of
Automatic.
aspeCt
size
(automaticaUy
signalsource
.,
selected
when
Auto
Aspect
isOn)<
4:3 normal Natural (with sidebars)
To
set the Cinema Mode to Video:
Select
Video
in step 3 above.
Using
the
FREEZE
feature
To
use the
FREEZE
feature:
Wh
. . h TV FREEZE k h .
en viewmg t e , press 0 to
rna
e t e picture a
still picture.
2
To
return to the moving picture, press
FR~ZE
again (or any
other button).
4:3 letter box TheaterWide 2
16:9 full Full
Note:
If the
TV
is left
in
FREEZE
mode
for more than
15
minutes, the FREEZE
mode
will automatically
be
released
and
the
TV
will return to moving picture.
Not defined
(no ID-I data
or HOMI
aspect data)
The
cunent
picture size you set under
"Selecting the picture size" on page 37.
Using the
FREEZE
function for any purpose other than your
private viewing may be prohibited under the Copyright
Laws of the United States and other countries, and may
subject you to civil and criminal liability.
Note:
The
auto
aspect
ratio feature
is
not
applicable
to PC
input.
To Next Page
Loading...
