Chapter
2:
Connecting
your
TV·
Connecting
a
personal
computer
(PC)
With either the PC
IN
or
HOMI connection, you can watch
your
computer's
display on the
TV
and hear the sound from
the
TV's
speakers.
To
connect a
PC
to the
PC
IN terminal on the TV:
When connecting a PC to the PC
IN
terminal on the TV,
use an analog RGB
(IS-pin)
computer
cable and a PC audio
cable.
PC
audio
cable
PC
audio
output
Conversion adapter
(if necessary)
• To use a PC, set the monitor output resolution on the PC
before connecting it to the TV.
The
PC IN terminal can
accept and display VGA,
SVGA,
XGA,
WXGA
and
SXGA
signal formats. For detailed signal specifications
(~?
page
56).
Other
formats
or
non-standard signals will not be displayed
correctly.
• To display the optimum picture, use the PC setting feature
(1&
"Using
the PC settings feature" on page 47).
Note:
•
The
PC audio input terminals on the
TV
are shared with the
HoMI-1 analog audio input terminals
(Il$"
page
48)
• Some PC models cannot be connected
to
this
TV
• An adapter is not needed for computers with a compatible
mini
o-sub
15-pin terminal.
18
I Depending on the
OVO'S
title
and
the specifications
of
the
PC on which you are playing the oVo-Video, some scenes
may
be
skipped or you may not
be
able
to
pause during
multi-angle scenes.
• Signal names for mini O-sub I5-pin connector
Pin
No.
Signal
Pin
No.
Signal
Pin
No.
Signal
name name
name
J R
6
Ground
II
Reserved
2 G
7
Ground
12
SOA
3
B
8
Ground
13
H-sync
4 Reserved
9 5V
14
V-sync
5
Reserved
10 Ground
15
SCL
To
connect a
PC
to the
HDMI
terminal on the TV:
When connecting a PC to the HOMI terminal on the TV, use
an HOMI-to OVI adapter cable and analog audio cables.
If connecting a PC with an HOMI terminal, use an HOMI
cable (type A connector). Separate analog cables are not
necessary
(1& page 15).
TV
back
panel
,---
HOMllN
--------,
Homl
2
PC
audio
cable
PC
audio
output
The
HOMI
input can accept and display VGA,
SVGA,
XGA,
WXGA,
SXGA,
480i (60Hz),
480p
(60Hz),
nop
(60Hz),
1080i (60Hz), and 1080p (24Hz/60Hz) signal formats. For
detailed signal specifications, see page 56.
Note:
•
The
edges
of
the images may be hidden.
• If receiving a 480i (HoMI), 480p (HoMI), 720p,
1080i,
or
1080p signal program, Native mode scales the video
to
display the entire picture within the borders
of
the screen
To Next Page
Loading...
