Preparing
the
remote
control
for
use
• Always remove batteries from the remote control
if
they
are
dead
or
if
the remote control is not
to
be
used for an
extended
period
of
time.
This
will prevent battery
acid
from
leaking into the battery compartment.
Remote
control
effective
range
~
16.4 ft (5m)
~
o.o.
:00:
~
Point remote control
1:'
toward remote sensor
on front of
TV.
"
..
-
====
~
..
"",~.[j
For optimum performance, aim the remote control directly
at the TV and make sure there
is
no obstruction between the
remote control and the
TV.
Squeeze tab
and lift cover.
Your TV remote control can operate your TV and many other
devices such as cable converter boxes, satellite receivers,
VCRs, DVD players, and HTIBs (home theater
in
a box),
even if they are different brands.
If
you have a Toshiba device:
Your TV remote control is preprogrammed to operate most
Toshiba devices
(~ page 23).
If
you have a non-Toshiba device or a Toshiba device
that the remote control is not preprogrammed to
operate:
You
can program the TV remote control so
it
will operate the
other device
(~
pages
21-25).
Installing
the
remote
control
batteries
1 Remove the battery cover from the back
of
the remote
control.
2 Install two "AAA" size batteries, making sure to match
the
+ and - signs on the batteries to the signs on the
battery compartment.
3 Reinsert the battery cover
in
the remote control until the
tab snaps.
Caution: Batteries must not
be
exposed
to excessive heat
such
as
sunshine, fire
or
the like.
Note:
• Be sure to use AAA size batteries.
• Dispose
of
batteries
in
a designated disposal area.
• Batteries should always
be
disposed
of
with the
environment
in
mind. Always dispose
of
batteries
in
accordance
with applicable laws
and
regulations.
• If the remote control does not operate correctly, or
if
the
operating range becomes reduced, replace batteries with
new
ones.
•
When
necessary
to
replace batteries
in
the remote control,
always replace both batteries with new ones Never mix
battery types or use new
and
used batteries
in
combination.