Installation
REGZA-L1NK Setup
Sleep
Timer
if~~j.!!.9~'t'li~,:~_
Logo LED Off
Note:
If a PC is not connected
or
there is no
pc
input
signal, this feature will
be
grayed
out
in
the
Setup
menu.
4
Press.
or
...,
to highlight the item you want to adjust.
5 Press
....
or
~
to make the appropriate adjustments.
You
can view an image from a PC on the
TV
screen.
When a
PC
is connected to the
TV's
PC
IN
terminal, you can
use the PC Settings feature to make adjustments to the image.
If
the edges
of
the picture are
cut
off, readjust the
Horizontal
Position
and
Vertical
Position.
If
the picture is atlected by
interference, readjust the
Clock
Phase
and
Sampling
Clock.
Using
the
PC
settings
feature
To
adjust
the
PC
settings:
1 Repeatedly press
~
to select PC input mode
(1lZ
"Selecting the video input source to view" page 33).
2 Press
M3'U
and open the
Setup
menu.
3 Highlight
PC
Settings
and press @.
From the
Locks
menu,
press""
to display the PIN
code
entering screen.
Enter
your
four-digit PIN
code
and
press
@.
Press""
to highlight
GameTimer
and press
~.
Press.
or
...,
to select the length
of
time until the Input
Lock
is
activated (30, 60, 90,
or
120 minutes) and press
@.
To cancel the GameTimer®:
Select
Off
in
step 4 above.
To deactivate the
Input
Lock once the GameTimer®
has activated it:
Set
the
Input
Lock
to
Off
(1&'
"Using
the input lock feature"
as described above).
Note:
• A message will
appear
when
10
minutes, 3 minutes,
and
1
minute remain on the Game
Timer.
• If the
TV
loses power with time remaining on the Game
Timer,
when
power
is
restored the
TV
will enter Input Lock mode (as
if
the GameTimer
had
been activated)
and
you will have
to
deactivate the Input Lock (as described above).
You
can use the GameTimer to set a time limit for playing a
video game
(30-120
minutes). When the GameTimer expires,
the TV enters Input Lock mode and locks out the input source
for the video
game
device
..
2
3
4
Using
the
GameTimer®
To set the GameTimer®:
1
Note:
The
screen
is
disrupted momentarily when adjusting
the
PC
settings.
This
is
not a sign
of
malfunction.
PC
Settings
Description
Done
Helps
to reduce noise and sharpen the picture.
The adjustment range
is
within ±16 from center.*
Moves the picture left/right.
The adjustment range
is
within ±50 from center.*
Moves the picture up/down.
The adjustment range
is
within ±IO from center.*
Reset
Vertical Position
Clock Phase
Sampling Clock
Aulo Adjust
Vertical
Position
Horizontal
Position
Clock
Phase
Mode
Using
the
control
panel
lock
feature
You can lock the control panel to prevent your settings from
being
changed
accidentally (by children, for example). When
the control panel lock
is
On,
none
of
the controls on the
TV
control panel will operate except
POWER.
To lock the control panel:
1 Press
M3'U
and highlight the
Locks
menu icon.
2
Press""
to display the PIN
code
entering screen.
3 Enter
your
four
..
digit PIN
code
and press @.
4
Press""
to highlight
Control
Panel
Lock.
5 Press
~
and.
or
...,
to highlight
On
and press @.
When
the control panel is locked and any button on the control
panel (except
POWER)
is pressed, the message
"NOT
AVAILABLE" appears.
D
·~
..
r,.,.
..
L
" The default settings may vary
depending
on the input signal
format.
Locks
Enable Rating Blocking Off
Edit
Rating
Limlls
Channels
Block
Input Lock Off
J£:oliIltIJjJrt.(IP<j{!;~_Q!f:;
Off
GameTimer
Off
E~
New
PIN
Code
To unlock the control panel:
Highlight
Off
in step 5 above,
or
press and hold the
VOLUME
- button
on
the
TV
control panel for about 10 seconds until
the volume icon appears.
Sampling
Clock
Auto Adjust
Helps to reduce noise and minimize periodic
vertical stripes on the screen.
The adjustment range
is
within ±10 from center.*
Highlight this item then press
@ to get an
optimulll adjustment automatically.
To Next Page
Loading...
