Setup/Installation
menu
layout
The Installation menu contains the Terrestrial and System Status menus.
To open the
Installation
menu (illustrated below), press
MOU
on the remote control
or
TV
control panel, open the
Setup
menu,
select
Installation,
and press @.
Icori
Terrestrial
System
Status
CL
Item
Input Configuration
Channel Program
Channel Add/Delete
Channel Tuning Mode
Time Zone
Signal Meter
System Information
Option
[Opens the Input Configuration menu]
[Start] - [Scans for new channels on
ANT/CABLE]
[Opens the Channel Add/Delete menu]
Standard/Auto/Digital
- Pacific/Alaska/Hawaii/AtianticlNewfoundlandlEastern/Centrall
Mountain
[Opens the Signal Meter menu]
- [Opens the System Information screen]
Navigating
the
menu
system
You
can use the buttons on the remote control
or
TV control
panel to access and navigate your
TV's
on-screen menu
system.
• Press
MOU
to open the menu system.
• When a menu
is
open, use the up/down/left/right arrow
buttons (
...
.........
) on the remote control
or
TV
control
panel to move
in
the corresponding direction
in
the menu.
• Press
@ to save your menu settings or select a highlighted
item. (A highlighted menu item appears
in
a different color
in the menu.)
• All menus close automatically
if
you do not make a
selection within
60
seconds, except the signal meter menu,
which closes automatically after about 5 minutes.
• To close a menu instantly, press
Ecr
Note:
•
The
menu
background
may
sometimes
appear
black,
depending on the signal the
TV
is receiving.
This
is not a
sign
of
malfunction.
•
The
Video sub-menu appears with a black background,
which looks different from other menus.
To Next Page
Loading...
