Item
Power
Top Menu
Description
Turns the select device on and off.
Accesses the top menu
of
a DVD.
Other
REGZA-LiNK
functions
When the
Enable
REGZA-L1NK
and each item
in
the
REGZA-L1NK
Setup
menu are set to
On,
the following
functions will be enabled.
Menu
Contents
Menu
Accesses the menu
of
a DVD.
Accesses the contents list when you press
8.
At this time, the
REGZA-L1NK
Player
Control
menu will disappear.
Item
TV Auto
Input Switch
Description
If
a connected
HDMI
device starts playing
video
or
audio, the
TV
will automatically
switch to the appropriate
HDMI
input.
Note. When you turn on the Audio Receiver; change its input
source,
or
adjust the sound volume, the sound will
be
output
from the audio receiver's speakers even
if TV Speakers has
been selected.
Turn
the
TV
off
and
on again to output the
sound from the
TV
speakers.
To
set the REGZA-LINK Setup:
1 From the
Setup
menu, highlight
REGZA-L1NK
Setup
and
press
8.
2
Press.
or
~
to highlight
Enable
REGZA·L1NK.
3 Press
~
or
~
to select
On.
Note.
If
you select
Enable
REGIA·LlNK
Off,
the other items
will
be
grayed
out.
4
Press.
or
~
to highlight the
REGZA-L1NK
Setup
item
you want to use, and press
~
or
~
to select
On
or desired
mode.
• TV Auto Input Switch:
On/Otf
•
TV
Auto Power:
On/Off
• Device Auto Standby:
On/Off
5 To save the new settings, highlight
Done
and press
8.
To revert to the factory defaults, highlight
Reset
and
press
8.
Note.·
•
These
functions depend on the devices that are connected.
•
The
REGZA-L1NK
Player
Control
item will be grayed
out
in
the following conditions:
- A non-HOMI input
is
currently selected.
-
The
Enable
REGIA·LlNK
item is set
to
Off.
-
The
connected CEC device
is
not a
playback
or
recording device.
REGZA-LiNK
input
source
selection
If a REGZA-L1NK device with HDMI switching capability
(e.g. Audio Receiver)
is
connected to the HDMI input, you
can select another REGZA-L1NK device that
is
connected to
the master
HDMI
device using the
TV's
INPUT
button. See
page 33 for details.
VOLUME
and
MUTE
controls
of
Audio
Receiver
With your
TV's
remote control, you can adjust
or
mute the
sound volume
of
the Audio Receiver. First, set the
MODE
SELECT
switch on the remote control to
TV.
•
r.t:1
~
adjust the volume level.
•
MOE
turns
off
the sound.
Note.
•
To
use this function.·
- Set Speaker Preference
to
Audio Receiver
in
the
REGZA-LiNK Setup menu.
- Confirm that a
connected
REGZA-LiNK device (such as
OVO
player, etc) is selected for the Audio Receiver input
source.
•
You
can also use this function when the audio receiver
is
connected to the
TV's
DIGITAL AUDIO
OUT
terminal (not
HOMI connection).
In
this case, select a digital audio input
mode
on the Aua'io Receiver.
• These functions
depend
on the device connected.
TV
Auto
Power
Device Auto
Standby
Speaker
Preference
If
a device is turned on, the TV turns
on
automaticall
y.
If
the
TV
is turned
off
the
TV
will send
a message to turn
off
all
of
the devices
connected to the TV.
From this item, you can set your audio
output preference to the TV speakers
or
the
audio receiver speakers. When this item
is
set to Audio Receiver, the
TV
remote can
be used to adjust
or
mute the volume
of
the
audio. This item will be grayed
out
unless
a REGZA-L1NK compatible audio receiver
is connected.
To Next Page
Loading...
