Adjusting
the
audio
Muting
the
sound
Press
M'f)E
on the remote control to partially reduce (1/2 MUTE)
or tum off (MUTE) the sound. Each time you press
M'f)E,
the
mute mode will change
in
the following order:
C 1/2
Mute-Mute-Volume-~
If the closed caption mode
is
set to
Off
when you select
"MUTE"
mode, the closed caption feature
is
automatically
activated if the
TV
program is Closed Captioned.
To
mute
the audio without automatically activating the closed caption
feature, use
~
to set the volume to
O.
See "Using the closed
caption mode"
(1& page 41) for more information on closed
caption modes.
Using
the
digital
audio
selector
You
can use the Digital
Audio
Selector
to conveniently switch
between audio tracks on a digital channel (for those channels
that have multiple audio tracks). This temporarily overrides
the audio track chosen by the language option under
Audio
Setup
(1& "Selecting stereo/SAP broadcasts" on page 42).
To
use the digital audio selector:
1 Press
M~U
and open the
Audio
menu.
2 Highlight Digital
Audio
Selector
and press @.
Audio
Settings
Advanced Audio Settings
Audio Setup
3 Press ...
or
T to select
Audio,
and then press
....
or
~
to
select the desired service.
4 Press
E~r
Selecting
stereo/SAP
broadcasts
The multi-channel TV sound (MTS) feature allows you to
output high-fidelity stereo sound. MTS also can transmit a
second audio program (SAP) containing a second language,
music, or other audio information (when provided by
individual stations).
When the TV receives a stereo or
SAP
broadcast, the word
"STEREO" or "SAP" appears on-screen when
REOLL
is
pressed.
The MTS feature is only available for analog signals on the
ANT/CABLE
input.
To
listen to stereo sound:
1 Press
M~U
and open the
Audio
menu.
2 Highlight
Audio
Setup
and press @.
3 In the
MTS
field, select
Stereo.
4 To save the new settings, highlight
Done
and press @.
To reset the settings to the factory defaults, highlight
Reset
and press @.
Note:
•
You
can typically leave the
TV
in
Stereo mode because
it will automatically output the type
of
sound being
broadcast (stereo
or
monaural).
• If the stereo sound
is
noisy, select
Mono
to
reduce the
noise.
To
listen to
an
alternate language on
an
ATSC digital
station (if available):
Highlight the
Language
field
in
step 3 above, and then press
....
or
~
to select the language you prefer.
To
listen to a second audio
program
on
an
analog
station
(if
available):
Select
SAP
in
step 3 above.
Note:
• A second audio program
(SAP)
can
be
heard only on
those
TV
stations that offer
it
For example, a station might
broadcast another language as a second audio program.
Ifyou have SAP
on,
you will see the current program on the
screen
but
hear the other language instead
of
the
programs
normal audio.
• Ifyou have SAP on
and
the station you are watching is
not broadcasting
a second audio program, the station's
normal audio will
be
output
However, occasionally there is
no sound
at
all
in
SAP
mode. If this happens, set the MTS
feature
to
Stereo mode.
To Next Page
Loading...
