Chapter
6:
Using
the
TV's
features
Displaying
TV
status
information
Understanding
the
auto
power
off
feature
To
display TV status information using RECALL:
Press
RE~LL
on the remote control.
The
following information will display
(if
applicable):
• Current input
(ANT/CABLE,
VIDEO
1,
etc.)
• If
ANT/CABLE
is the current input, either
"CABLE"
(for
cable
TV)
or
"ANT"
(for over-the-air broadcasts).
• Channel
number
(if
in
ANT/CABLE
mode)
• Channel label
(if
set)
• Digital signal strength indicator (bar graph
in
lower right
corner
of
box; for ATSC signal only)
• Stereo,
Mono
or
SAP
audio status (when HDMI input
mode, Dolby Digital
or
PCM)
• Video resolution
• Aspect ratio
of
incoming video signal (4:3
or
16:9)
• V-Chip rating status
•
Game
Timer
(if
set)
1--'
t··t1Mi,.,u:uiiUl-dU;W*
.:
.
The
TV
will automatically turn itself
off
after approximately
15
minutes
if
it is tuned to a vacant channel
or
a station that
completes
its broadcast for the day.
This
feature functions
in
ANT/CABLE
mode
only.
Understanding
the
last
mode
memory
feature
If
the power
is
cut on' while you
are
viewing the
TV,
the
Last
Mode Memory feature automatically
turns
on the
TV when the power
is
resupplied.
Note: If it's possible,
and
you will
be
away from the
TV
for an
extended
period
of
time you should unplug the
power
cord.
To
close the
RECALL
screen:
Press
RE~LL
again.
To
display TV status information using INFO:
Press
lao
on the remote control.
The
following additional information will display for
off
air
digital
channels
(if
applicable):
• Title
• Duration
• Detailed description
iti:Niwm
M
k!4ti*
MLB Young's
xxx...
9:00pm'
":OOpm
EST
Today's
Malor League 811gebllll
1-"
t·>t1Mn
.:
,
Note:
The
location
of
the banner can
be
moved
to
the top or
bottom
of
the screen
by
pressing'"
or'"
while the RECALL
or INFO display is on-screen.
To Next Page
Loading...
