Adjusting
the
audio
quality
You can adjust the audio quality by adjusting the bass, treble,
and balance.
To
adjust the audio quality:
1 Press
MOU
and open the
Audio
menu.
2 Highlight
Audio
Settings
and press
@.
3
Press'"
or
... to highlight the item you want to adjust
(Bass,
Treble,
or
Balance).
4 Press
....
or
~
to adjust the level.
•
...
makes the bass
or
treble weaker
or
increases the
balance
in
the left channel
(depending
on the item
selected).
•
~
makes the bass
or
treble stronger
or
increases the
balance
in
the right channel (depending on the item
selected).
5 To save the new settings, highlight
Done
and press
@.
To reset the settings to the factory defaults, highlight
Reset
and press
@.
Selecting
the
optical
audio
output
format
You
can use this feature to select the optical audio output
format when you connect a Dolby Digital decoder
or
other
digital audio system to the
Optical
Audio
Out
terminal on the
TV (see "Connecting a digital audio system" on page 17).
To
select the optical audio output format:
1 Press
MOU
and open the
Audio
menu.
2 Highlight
Audio
Setup
and press
@.
3
In
the
Optical
Output
Format
field, select either
Dolby
Digital
or
PCM,
depending on your device.
4 To save the new settings, highlight
Done
and press
@.
To revert to the factory defaults, highlight
Reset
and
press@.
Using
the
Dolby®
Digital
Dynamic
Range
Control
feature
This dynamic range control feature causes the ATSC dynamic
range to be further compressed, allowing you to switch from
ATSC to analog broadcasts at the same dynamic range.
To
use the Dolby Digital Dynamic Range Control:
1 Press
MOU
and open the
Audio
menu.
2 Highlight
Audio
Setup
and press
@.
3
In
the
Dolby
Digital
Dynamic
Range
Control
field, select
Compressed.
When
Standard
is selected, the audio
is
output with minimal compression.
4 To save the new settings, highlight
Done
and press
@.
To revert to the factory defaults, highlight
Reset
and
press@.
Note:
• This item will
be
grayed
out for NTSC signals, Video,
ColorStream,
and
PC
inputs.
•
The
Dolby Digital Dynamic Range Control will function
in
relation to Optical Output Format (PCM mode)
43 I