Toshiba B-EP2DL-GH40-QM-R - Page 129

CHAPTER 4 TRANSMISSION SEQUENCE
B-EP Series
4-19
(4) When interrupting communication while the 2nd label command is running, and then
retransmitting the 2nd label data from the beginning,
1st transmission:
{D0821,0458,0801|}
{C|}
{SG;0161,0339,0096,0300,2,BM[D6][10][00][00][00] 1st label data
     [FF][FF][FF][FF][FF][FF]|}
{XS;I,0001,0000C2001|}
{D0821,0458,0801|}
{C|} 2nd label data (underway
{SG;0161,0339,0096,0300,2,BM[D6][10][00]



2nd transmission:
{D0821,0458,0801|}
{C|}
{SG;0161,0339,0096,0300,2,BM[D6][10][00][00][00] 2nd label data
     [FF][FF][FF][FF][FF][FF]|}
{XS;I,0001,0000C2001|}
Print result: The 1st label data is printed after the 1st transmission, and a command error
occurs after the 2nd transmission. (data reception continues until the number of
bytes specified by the graphic data in the initial transmission is obtained. Then,
a command error occurs when the end code of the command is checked.)
Transmits the 2nd label from
the beginning.

Interrupts communication while the
command is running.