CHAPTER 8 ESC/POS MODE (INTERFACE COMMANDS)
B-EP Series
8-16
8.10.8 DOWNLOADED CHARACTER (WRITABLE CHARACTER) SET COMMAND [ESC] %
Function Sets or cancels downloaded characters (writable characters).
Format [ESC] %n
Term ASCII: ESC % n
Hex: 1Bh 25h n
[Parameter]
n: Setting / canceling downloaded character 0 ≤ n ≤ 255 (00h ≤ n ≤ FFh)
b7 b0
-- -- -- -- -- -- --
Default value n: 0
Explanation (1) n is valid only in the least significant bit.
(2) If downloaded characters (writable characters) are not registered with a specified
code, the internal ANK characters will be printed. Also, when the downloaded
characters (writable characters) are canceled, the internal ANK characters will be
selected automatically for printing.
Reference Downloaded Character (Writable Character) Define Command ([ESC] &)
Downloaded Character Erase Command ([ESC] ?)
0: Canceling downloaded characters
1: Setting downloaded characters
To Next Page
Loading...
Need help?
General