CHAPTER 8 ESC/POS MODE (INTERFACE COMMANDS)
B-EP Series
8-33
8.10.19 DOUBLE PRINTING SET COMMAND [ESC] G
Function Sets or cancels double printing.
Format [ESC] Gn
Term ASCII: ESC G
Hex: 1Bh 47h
[Parameter]
n: Double printing 0 ≤ n ≤ 255 (00h ≤ n ≤ FFh)
b7 b0
-- -- -- -- -- -- --
Default value n: 0
Explanation (1) n is valid only in the least significant bit.
(2) The same print output is obtained as when the Bold Printing Set Command
([ESC]E) is executed.
Reference Bold Printing Set Command ([ESC] E)
0: Canceling double printing
1: Setting double printing
To Next Page
Loading...
Need help?
General