Toshiba B-EP2DL-GH40-QM-R - 8.10.50 BARCODE HEIGHT COMMAND

CHAPTER 8 ESC/POS MODE (INTERFACE COMMANDS)
B-EP Series
8-74
8.10.50 BARCODE HEIGHT COMMAND [GS] h
Function Sets the barcode height.
Format [GS] hn
Term ASCII: GS h
Hex: 1Dh 68h
[Parameter]
n: No. of dots for the barcode height
1 ≤ n ≤ 255 (01h ≤ n ≤ FFh)
Default value n: 162
Explanation (1) When “n” is set to any value other than the above, this command will be ignored.
Reference Barcode Print Command ([GS] k)