CHAPTER 5 TPCL-LE MODE (INTERFACE COMMANDS)
B-EP Series
5-103
5.6.7 TWO-DIMENSIONAL CODE FORMAT COMMAND (Data Matrix) [ESC] XB
Format c [ESC] XBaa; bbbb, cccc, d, ee, ff, gg, h (, Ciiijjj) (, Jkkllmmmnnn) (= ooo ------ ooo)
[LF] [NUL]
d [ESC] XBaa; bbbb, cccc, d, ee, ff, gg, h (, Ciiijjj) (, Jkkllmmmnnn)
(; pp
1,
pp
2,
pp
3,
------ , pp
20
) [LF] [NUL]
Term aa: Two-dimensional code number
00 to 31
bbbb: X-coordinate of the print origin of the two-dimensional code
Fixed at 4 digits (in 0.1 mm units)
cccc: Y-coordinate of the print origin of the two-dimensional code
4 or 5 digits (in 0.1 mm units)
d: Type of two-dimensional code
Q: Data Matrix
ee: ECC type
00: ECC000
01: ECC050
04: ECC050
05: ECC050
06: ECC080
07: ECC080
08: ECC080
09: ECC100
10: ECC100
11: ECC140
12: ECC140
13: ECC140
14: ECC140
20: ECC200
ff: 1-cell width
00 to 99 (in units of dots)
gg: Format ID
01: Format ID 1
02: Format ID 2
03: Format ID 3
04: Format ID 4
05: Format ID 5
06: Format ID 6
* When ECC200 is designated as ECC type, the format ID designation is ignored.
When format ID of 11 through 16 is designated, ECC200 is automatically selected (to
ensure compatibility with the old model).
To Next Page
Loading...
Need help?
General