Toshiba B-EP2DL-GH40-QM-R - Page 178

CHAPTER 5 TPCL MODE (INTERFACE COMMANDS)
B-EP Series
5-8
Programmable value range by the software
[mm]
Item
Model
B-EP2DL B-EP4DL
203 dpi 203 dpi
Mode Batch Strip Batch Strip
Thermal head dot density 8 dots/mm 8 dots/mm
Thermal head width 48.0 mm 104.0 mm
Pitch
Label
Max. 10.0 13.0 10.0 13.0
Min. 999.9 67.0 999.9 67.0
Tag
Max. 10.0 - 10.0 -
Min. 999.9 - 999.9 -
Label length
Max. 7.0 10.0 7.0 10.0
Min. 997.0 60.0 997.0 60.0
Paper length
Backing
paper
Max. 16.0 50.0
Min. 58.0 115.0
Tag
Max. 16.0 - 50.0 -
Min. 58.0 - 115.0 -
Label width
Max. 13.0 47.0
Min. 55.0 112.0
Label-to-label gap
Max. 3.0 3.0
Min. 7.0 7.0
Black mark length
Max. 3.0 3.0
Min. 7.0 7.0
Effective print width
Max. 10.0 10.0
Min. 48.0 104.0
Effective print
length
Label
Max. 7.0 10.0 7.0 10.0
Min. 997.0 60.0 997.0 60.0
Tag
Max. 7.0 - 7.0 -
Min. 997.0 - 997.0 -
Slow-up/down
interval
Slow up 1.0 1.0
Slow down 1.0 1.0
Paper thickness
Label
100 μm to 120 μm
Tag
120 μm
Receipt
65 μm to 75 μm
Max. effective print length for on-
the-fly issuing
997.0 499.0