Toshiba B-EP2DL-GH40-QM-R - Page 232

CHAPTER 5 TPCL-LE MODE (INTERFACE COMMANDS)
B-EP Series
5-62
g When one field width ≥ specified character string width
(Space between characters < 0, Specified character string digits = 5)
■ Print image when the parameter setting is omitted.
A = 1 field width – Specified character string width = 185 dots – 120 dots = 65 dots
B = A/Data length = 65 dots/4 = 17 dots (rounded up)
One character width = 1 character width – B = 50 dots – 17 dots = 33 dots
■ Print image when the parameter setting is specified.
* When the number of print data is 5 digits or more, the condition of ineffectiveness (3) is satisfied.
In this case, the characters are printed in normal width.
1 field width (185 dots)
A
A B C D
Specified character string width (120 dots)
One character width (50 dots)
Space between characters (-15 dots)
Specified character string width (117 dots)
A B C D
One character width (33 dots)
Space between characters (-5 dots)