CHAPTER 5 TPCL-LE MODE (INTERFACE COMMANDS)
B-EP Series
5-106
(5) 1-cell width
When 1-cell width is set to 00 for the Data
Matrix or CP code, a two-dimensional code
is not drawn. However, the barcode printed
on the previous label is cleared.
The maximum cell width is 99 dots.
(However, the number of digits of data
should be limited so the two-dimensional
code can be printed within the 2-inch head
width.)
(6) Format ID
Data Matrix can handle all codes including alphanumerics, symbols and Kanji. Since the
data compression rate varies according to the code, a code to be used is designated
using the format ID.
Format ID Code Details
1 Numerics 0 to 9 space
2 Letters A to Z space
3 Alphanumerics, symbols 0 to 9 A to Z space . , - /
4 Alphanumerics 0 to 9 A to Z space
5 ASCII (7 bit) 00H to 7FH
6 ISO (8 bit) 00H to FFH (Kanji)
(7) Rotational angle of two-dimensional code
0° 90° 180° 270°
1-cell width
1-cell width = 3
Point of origin
To Next Page
Loading...
