CHAPTER 7 RECEIPT MODE (INTERFACE COMMANDS)
B-EP Series
7-13
Note (1) If the print ratio of one line (the print head width) is higher than defined, printing
may become poor, or the printer may be reset. When a horizontal line is to be
drawn, note the print ratio.
(2) When any line length exceeding the effective print width, the length is corrected to
the maximum head width that varies depending on model.
B-EP2DL-GHxx B-EP4DL-GHxx
Max. head width 48.0 mm 104.0 mm
To Next Page
Loading...
