2.PRINTER SETUP
15
2.3.1 Loading the Media(Cont.)
14. Loading with cutter
When the optional Cutter Module is fitted, the media is automatically
cut. A disc cutter is available as option.
Insert the leading edge of the media into the cutter until it comes out the
Media Outlet of the Cutter Module.
CAUTION!
1. Be sure to cut the backing
paper of the label. Cutting
labels will cause the glue to
stick to the cutter which may
affect the cutter quality and
shorten the cutter life.
2. Use of tag paper when the
thickness exceeds the
specified value may affect
the cutter life.
The cutter is sharp, so care
must be taken not to injure
yourself when handling the
cutter.
To Next Page
Loading...
