4.1.3 Optional Cutter Module
The disc cutter and rotary cutter are available as an option. They are both
cleaned in the same way. When removing the Cutter Cover of the rotary
cutter unit, remove the screws from the bottom of the cover.
1. Loosen the two Plastic Head Screws to remove the Cutter Cover.
2. Remove the jammed paper.
3. Clean the Cutter with a soft cloth slightly moistened with alcohol.
4. Attach the Cutter Cover.
1. Be sure to turn the power
off before cleaning the
Cutter Module.
2. As the cutter blade is sharp,
care should be taken not to
injure yourself while
cleaning.
To Next Page
Loading...
