Toshiba B-EX4T2 SERIES - 6 Printer Specifications

6. PRINTER SPECIFICATIONS
44
6. PRINTER SPECIFICATIONS
This section describes the printer specifications.
Model
Item
B-EX4T2/D2-GS
B-EX4T2-TS
B-EX4T2-HS
Destination
QM: World wide
B-EX4T2-GS12-QM-R
B-EX4D2-GS12-QM-R*1
B-EX4T2-TS12-QM-R
B-EX4T2-HS12-QM-R
QQ:North America
B-EX4D2-GS12-QQ-R
-
-
Dimension (W x D x H)
278 mm x 460 mm x 310 mm (10.9” x 18.1” x 12.2”)
Weight (kg)
17 kg
Operating temperature range
5 degC to 40 degC (40 degF to 104 degF)
Relative humidity
25% to 85% RH (no condensation)
Power supply
Universal switching power source AC 100 V to 240 V, 50/60 Hz +/- 10%
Input voltage
AC100 V to 240 V, 50/60 Hz +/- 10%
Power
Consumption
During a print job*2
157.34W 0.71A
During stand-by
15W or less
During sleep mode
5.7W 0.09A
Resolution
8 dots/mm (203 dpi)
11.8 dots/mm (300 dpi)
23.6 dots/mm (600 dpi)
Printing method
T2: Thermal transfer
or Direct thermal
D2: Direct thermal
T2: Thermal transfer or Direct thermal
Printing speed
76.2mm/sec. (3 in/sec.)
152.4mm/sec (6 in/sec.)
254.0mm/sec.(10 in/sec.)
304.8mm/sec.(12 in/sec.)
76.2 mm/sec. (3 in/sec.)
127.0mm/sec. (5 in/sec.)
203.8mm/sec. (8 in/sec.)
254.0mm/sec.(10 in/sec.)
304.8mm/sec.(12 in/sec.)
50.8 mm/sec. (2 in/sec.)
76.2 mm/sec. (3 in/sec.)
101.6 mm/sec. (4 in/sec.)
127.0mm/sec. (5 in/sec.)
152.4mm/sec. (6 in/sec.)
Available media width (including
backing paper)
25.0 mm to 114.0 mm (0.98 inches to 4.49 inches)
15.0 mm to 114.0 mm
(0.59inches to
4.49inches)
Effective print width (max.)
104.0 mm (4.1 inches)
Issue mode
Batch
Strip (Strip mode is enabled only when the optional Strip Module is installed.)
Cut (Cut mode is enabled only when the optional Cutter Module is installed.)
LCD Message display
Graphic type 128 x 64 dots
*1: B-EX4D2-GS12-QM-R complies for U.S.A, Canada, Australia, EU and EFTA
*2: While 20% slant lines are printed in the specified format.