Toshiba B-EX4T2 SERIES - Print Test after Your Drivers Have Been Installed, Perform a Print Test

2.PRINTER SETUP
28
2.8 Print Test
After your drivers have been installed, perform a print test.
Performing a print test using the Printer Driver
The printer driver’s Properties screen allows you to set the
communication conditions, media size, and other printing conditions
in accordance with your operating environment. For details, refer to
the Help for the Windows Printer Drivers screen.
Example: Stock tab display of the Printer Driver’s Properties Screen
Print Method: Direct thermal or thermal transfer is selectable.
Sensor: Media sensor type is selectable.
Issue Mode: Batch, strip or cut is selectable.
Post-print Action: Whether to use the cutter or not is selectable.
Fine Adjustment: Adjustment values for the feed amount, cut/strip
position, etc. can be set.
Print Method
Sensor
Issue Mode
Post-print Action
(Cut)
Print Speed
Label Gap
Fine Adjustment
B-EX4T