Toshiba B-EX4T2 SERIES - Lcd

3. ONLINE MODE
30
3.2 LCD
Online state
Error state
(Example: Head open error)
No.
Description
(1)
Model name and firmware version
(2)
Message
(3)
The number of labels printed
(4)
IP address (only when LAN/WLAN is enabled.)
(5)
Radio intensity (only when WLAN is enabled.)
Indicates the radio intensity in 4 levels.
(6)
WLAN connection (only when WLAN is enabled.)
▪ Lights up when connecting to an access point.
▪ Flashes while roaming.
▪ Goes off when disconnected.
(7)
Presence of a print job
Appears when a print job exists.
(8)
RFID (only when RFID module is installed.)
▪ Appears when a communication between the printer and the
RFID module is enabled.
▪ Flashes while communicating with the RFID module.
(9)
Ribbon near end
Flashes when a ribbon near end state is detected.
(10)
The number of remaining labels to print
(11)
Error description and solution
(12)
Help guide
Appears when a help guide message is provided. Press the
[RIGHT] key to see the help guide message.
(1)
(2)
(3)
(4)
(5)
(6)
(8)
(7)
(9)
(10)
(12)
(11)