Toshiba B-EX4T2 SERIES - Installing Printer Drivers

7. SUPPLY SPECIFICATIONS
50
7.1.4 Effective Print Area
7.1.4.1 Relationship between Print Head Effective Print Width and Paper Width
7.1.4.2 Effective Print Area of Tags and Labels
NOTES:
1. Print quality in the shaded area is not guaranteed. For the label, printing in the 1-mm width area
around the label is not guaranteed as well as the shaded area shown above.
2. This printer paper set position is left side,
The center of the paper (label and tag) is not almost aligned with the center of the print head.
3. If printing is performed in the shaded area, the ribbon may wrinkle. This may affect the print quality of
the guaranteed printing area.
2 mm
Outside
printing
area
Outside
printing
area
8 mm
104.0mm±0.2mm
(Effective print head width)
114.0mm
(Max. paper width)
Printing area
30.0mm
(Min. paper width)
Paper
position
(Left)
Paper
position
(Right)
Feed direction
10 mm to 1500 mm
Label/tag length
Feed direction
Label/tag width (See Note below.)
(Backing paper width)
1.5 mm from right
edge of paper
1 mm
Detection area
3.5 mm from left
edge of paper
Detection area
1 mm
Guaranteed printable area