Toshiba B-EX4T2 SERIES - Page 62

APPENDIX 2 INTERFACE
57
 Serial interface (Option: B-EX700-RS-QM-R)
Type: RS-232C
Communication mode: Full duplex
Transmission speed: 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 115200 bps
Synchronization: Start-stop synchronization
Start bit: 1 bit
Stop bit 1 bit, 2 bit
Data length: 7 bit, 8 bit
Parity: None, EVEN, ODD
Error detection: Parity error, Framing error, Overrun error
Protocol: Unprocedure communication
Data input code: ASCII code, European character 8 bit code, graphic 8 bit code, JIS8 code, Shift JIS
Kanji code, JIS Kanji code
Receive buffer: 1M byte
Connector:
Pin No.
Signal
1
N.C
2
TXD (Transmit Data)
3
RXD (Received Data)
4
DSR (Data Set Ready)
5
SG (Signal Ground)
6
DTR (Data Terminal Ready)
7
CTS (Clear to Send)
8
RTS (Request to Send)
9
N.C
 Parallel interface (Centronics) (Option: B-EX700-CEN-QM-R)
Mode: Conforming to IEEE1284
Compatible mode (SPP mode), Nibble mode
Data input method: 8 bit parallel
Control signal:
Data input code: ASCII code
European 8 bit code
Graphic 8 bit code
JIS8 code
Shift JIS Kanji code
JIS Kanji code
Receive buffer: 1MB
SPP Mode
Nibble Mode
ECP Mode
nStrobe
HostClk
HostClk
nAck
PtrClk
PeriphClk
Busy
PtrBusy
PeriphAck
Perror
AckDataReq
NAckReverse
Select
Xflag
Xflag
nAutoFd
HostBusy
HostAck
nInit
nInit
nReverseRequest
nFault
nDataAvail
nPeriphRequest
nSelectIn
IEEE1284Active
IEEE1284Active