Toshiba D-VR3SU - Time Slip Recording Feature; Watching Recorded Content Live; Recording From External Devices; Recording via External Device Inputs

BeingRecorded(Ti e Slip)
RecordingFrom
ExternalDevic
z
% iiii_i_¸
iiii_ (
This function allows yon to watch the recently recorded 10-
second images on the PIP screen while a recording is ill
progress.
1
Press the TIME SLIP button on the remote control.
The recently recorded 10-second images are
played back on tire PIP screen.
This function starts to operate l0 seconds from
the time y_m press the REC button.
On the TIME SLIP scn'en, you can playback,
scan, or perform other operations for the recorded
program using the playback related buttons.
Pre_'_ the _ button to scan tire recording in the
reverse onk'r, from the end to the star/.
Press the _ button to scan to the n, ccntly
recorded 10- second images.
2
Press tire STOP button once to clear the TIME SLIP
function.
• To stop a recording while a TIME SLIP function is
in progress, press the STOP button twice.
Follow these directions to record onto a disc or a tape
from External Devices.
Connect tire Line out jack of yonr External
Devices to the Lille IN jack on tire front or
rear of yonr DVD Recorder-VCR using
Audio/Video (able.
2
Power on your DVD Recorder-VCR and
switch to Line In mode by pressing the
INPUT SEL on tire remote.
The front panel display changes on the
following sequence
i_ Channel Number 4. L1 4. L2-> DV, l
When yonr DVD Recorder-VCR is ill the
stop state, set the operation mode of your
External Dexices to play, mode.
Press tire REC bntton on your DVDRecorde>VCR when tire image from which
you want to start recording is displayed.
Press tile STOP button on your DVD
Recorder-VCR when the recording is finished.
using AudioFVideocable.
68 - English