e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C © 2008 TOSHIBA TEC CORPORATION All rights reserved
2-73
To increase the sharpness intensity
* This adjustment is effective when you want to copy light text, thin lines or illustrations more clearly.
(a) Enter the adjustment mode [05]. Change the value of the code [922] to adjust the default value for
the sharpness intensity.
Color mode Original mode [05] code
Recommended
value
Accepta
ble
range
value
Default
Black User custom 05-922
Set a value larger
than 128.
(129 to 228)
0 to 255 128
<Note> If the setting value is too large, Moiré may appear.
To copy text or lines more clearly
(a) Enter the adjustment mode [05]. Increase the value for the code [925] to make the text and lines
darker (improving faint text or thin lines).
Original mode [05] code
Recommended
value
Acceptable
range value
Default
User custom 05-925
Set a value larger than
2.
0 to 4 2
<Note> If the setting value is too large, the life of consumables may be shortened.
To adjust copy density
(a) Enter the adjustment mode [05]. Change the value for the codes [931] and [940] to adjust the copy
density. The larger the setting value is, the darker the image becomes. The smaller the setting value is,
the lighter the image becomes.
Base
original
mode
Density mode [05] code Recommended value
Accepta
ble
range
value
Default
Automatic 05-940
Text/Photo
Manual 05-931
Set a value smaller than
128 to make the image
darker.
Set a value larger than
128 to make the image
lighter.
0 to 255 128
2. Copier-specific Adjustments
To Next Page
Loading...
Need help?
General
