e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C © 2008 TOSHIBA TEC CORPORATION All rights reserved
3-84
* This adjustment will have an effect only on Auto or Color mode printing.
(5) Open the property page of the printer driver and press [Setting] button in the "Image Quality" tab. Mark the
"Detail" checkbox in the "Color Balance" tab and then press the [Edit] button.
• Set the value for the Low/Medium density of the color you would like to adjust within a range of "1" to "4"
in the "Color Balance Details" option.
*This adjustment will have an effect only on printing on the Windows PCL6, PS3 or XPS emulation printer
driver. (This adjustment cannot be performed on a Macintosh printer driver.)
* Initially, set "4" and check the printout.
After changing the option on the printer driver, print and check the print image quality.
If further image quality adjustments are still necessary, use the next procedure.
PCL6 PS3 XPS
3. Printer-specific Adjustments
To Next Page
Loading...
Need help?
General
