4.SCAN FUNCTIONS
Scan to USB Memory 101
4 SCAN FUNCTIONS
4
Press or to select “USB”, and then press [OK].
5
Press , and then make the scan settings as required.
The settings available for Scan to USB Memory are as follows:
To make further settings, see the following.
P.103 “Scan Settings”
6
Press [START].
When you store scans in a USB storage device, never attempt to remove the device from the equipment until
data transmission is completed. Removing the USB storage device during data transmission may corrupt the
device.
y Originals are scanned and stored if they are placed on the Automatic Document Feeder.
y If originals are placed on the original glass, perform the procedure from step 7.
Menu Functions Settings Description
FILE NAME(MAX128) - An initial file name can be changed.
P.110 “Character entry”
FILE FORMAT PDF MULTI Stores your scan as a PDF file.
Select [MULTI] for saving several pages
as a single file.
Select [SINGLE] for saving several pages
as a separated single file for each page.
SINGLE
TIFF MULTI Stores your scan as a TIFF file.
Select [MULTI] for saving several pages
as a single file.
Select [SINGLE] for saving several pages
as a separated single file for each page.
SINGLE
JPEG Stores your scan as a JPEG file.
This setting is not available when
“BLACK” is selected in the “COLOR
MODE” function.
SELECT SCAN TYPE
USB
BLACK
300dpi
USB
DocYYMMDD
PDF
To Next Page
Loading...
