Toshiba e-Studio 2505H - Continuous Copying Speed

8.SPECIFICATIONS
e-STUDIO2505H/e-STUDIO2505F Specifications 145
8 SPECIFICATIONS
Automatic Document Feeder
y These specifications vary depending on the copying conditions and the environment.
y Specifications and appearance are subject to change without notice in the interest of product improvement.
 Continuous copying speed
The values below are measured when originals are set on the original glass, 100% and nonsort multiple copies are made.
sheets/min.
* A3 and LD can be loaded only on the bypass tray.
y TOSHIBA-recommended paper is used for the values of the specifications above.
y The bypass copying speed is as listed above when specifying the paper size.
y This specification varies depending on the copying conditions and the environment.
Copy sides 1-side
Number of originals (A4)
50 originals (80 g/m
2
, 20 lb. Bond) or 9.5 mm or less in height (more than 80 g/m
2
, 20 lb. Bond)
Feeding speed 20 sheets/min. (A4, LT)
Acceptable originals A3, A4, A5-R, B4, B5, LG, LT, LD, ST-R, 8K, 16K
Paper weight
50 - 104 g/m
2
, 13 - 27 lb. Bond
Power source Power supplied from the equipment
Dimensions 385 mm (15.16") (W) x 445 mm (17.52") (D) x 88 mm (3.46") (H)
Weight Approx. 3.6 kg (7.9 lb)
Power consumption 40 W max.
Paper size Paper source Copying speed
A4, A5-R, B5, LT, ST-R Drawer 25
Bypass tray 25
A4-R, B5-R, LT-R Drawer -
Bypass tray 19
B4, FOLIO, LG, COMP Drawer -
Bypass tray 16
A3, LD Drawer -*
Bypass tray 14