5 VARIOUS FUNCTIONS
122 User Functions Menu List
*1 Available only for e-STUDIO2505F.
*2 This menu can be used only in equipment for the North America.
NETWORK COMPLETE - Completes the network settings.
ETHERNET AUTO, 10MBPS HALF DUPLEX,
10MBPS FULL DUPLEX, 100MBPS
HALF DUPLEX, 100MBPS FULL
DUPLEX
Select the desired combination of
communication speed and
transmission method.
TCP/IP ADDRESS
MODE
STATIC IP, DYNAMIC, NO AUTO IP Sets a method for specifying an IP
address.
IP ADDRESS 000. 000. 000. 000 - 255.255.255.255 Sets the IP address of this equipment.
SUBNET MASK 000. 000. 000. 000 - 255.255.255.255 Sets the subnet mask of this
equipment.
DEFAULT
GATEWAY
000. 000. 000. 000 - 255.255.255.255 Sets the default gateway of this
equipment.
HTTP HTTP SERVER ENABLE, DISABLE Sets whether to use the HTTP network
server service.
PRIMARY PORT
NUMBER
1 - 65535 Sets the primary port number to be
used for receiving HTTP access from
other clients. Normally use the default
port number “80”.
SUPPLY
NOTICE
*2
DESTINATION
SETUP
FAX NUMBER - Sets the contact information for
ordering supplies.
E-MAIL -
AUTO DETECT OFF, ON Sets whether to detect information
automatically.
OTHER
INFORMATION
CUSTOMER
NUMBER
- Sets other various contact information.
CONTACT
NAME
-
CONTACT TEL
NUMBER
-
SHIP TO NAME -
SHIP TO
ADDRESS
-
Menu Functions Settings Description
To Next Page
Loading...
