Toshiba e-Studio 2505H - Page 15

1.PREPARATION
Components 13
1 PREPARATION
6. [COPY] button
Press this button to use the copy functions.
7. [SCAN] button
Press this button to use the scan functions.
8. [FAX] button (Only for e-STUDIO2505F)
Press this button to use the Fax functions. Available only when the Fax Unit is installed.
For details on how to use the Fax functions, see the following manual.
 Fax Guide
9. [USER FUNCTIONS] button
Changes the equipment’s default settings.
 P.119 “User Functions Menu List”
10. button
Press this button on menu screens to move to the item above. If you press this button when the top menu item is
highlighted, the bottom menu item is displayed.
11. [JOB STATUS] button
Displays the processing status of print, scan, or fax, as well as allowing you to view the performance history and delete
the job.
For details on how to use the Fax functions, see the following manual.
 Fax Guide
12. [SETTINGS] button
Displays the current settings.
13. [ENERGY SAVER] button
Enters into the energy saving mode.
14. [FUNCTION CLEAR] button
Restores all the selected functions to the defaults.
15. [CLEAR/STOP] button
Clears the number entered with the digital keys such as the number of copies, as well as cancels scanning or copying
the original.
16. [START] button
Starts the copying, scanning, or faxing operation.
17. Digital keys
Enter numbers such as the number of copies, password or fax number.
18. button
Press this button once on the main screen (Copy) to show the “EXPOSURE” screen for Europe and the Americas, or
the “ID CARD” screen for regions other than Europe and the Americas. Press it on menu screens to move to an item
on the right or increase the setting.
 P.33 “Using the “EXPOSURE” or “ID CARD” function quickly”
19. [OK] button
Determines the items or operations selected in each menu.
20. button
Press this button on menu screens to move to the item below. If you press this button when the bottom menu item is
highlighted, the top menu item is displayed.
21. [CANCEL] button
Cancels the current settings and returns to the previous item.
22. button
Press this button once on the main screen (Copy) to show the “ORIGINAL MODE” screen. Press it on menu screens to
move to an item on the left or decrease the setting.
 P.34 “Selecting “ORIGINAL MODE” quickly”