2.COPY FUNCTIONS
Copy Settings 45
2 COPY FUNCTIONS
3
Follow the instructions on the LCD screen to use the “2IN1/4IN1” function. You are
instructed to make the following settings.
y ORIGINAL SIZE
Press or to select the size of the original.
y ORIGINAL ORIENTATION
Press or to select the portrait or landscape orientation of the original.
y SET ORIGINAL
Place the originals as shown on the LCD screen. Make sure that you place the original in the same orientation
as the one selected in “ORIG. ORIENTATION”.
y NEXT ORIGINAL?
When you place the original on the original glass, this message appears. Press or to select “SCAN NEXT
PAGE”. Select “FINISHED” when you have finished scanning your originals.
y When you place the original on the Automatic Document Feeder, the size of the original selected in
[ORIGINAL SIZE] is disabled as it is detected automatically.
y For original sizes not supported by the Automatic Document Feeder, specify [ORIGINAL SIZE] and place
the original on the original glass.
y “CANCEL JOB?” is displayed if there is no operation for a certain period.
To Next Page
Loading...
