3.PRINT FUNCTIONS
Printing With Best Functions for Your Needs 83
3 PRINT FUNCTIONS
5
If you want to add a margin space between facing pages, enter a width in the [Center]
box, and if you want to add a margin on the outside edge, enter a width in the [Outer]
box.
y You can change the unit of the margin at the [Units].
y The center margin can be set from 0.00 mm to 12.70 mm in units of 0.10 mm when the unit is mm, and from
0.00 inch to 0.50 inches in units of 0.01 inch when the unit is inches.
The printed images will be reduced according to the margin setting.
y The outer margin can be set from 0.00 mm to 25.40 mm in units of 0.10 mm when the unit is mm, and from 0.00
inch to 1.00 inches in units of 0.01 inch when the unit is inches.
The printed images will be reduced according to the margin setting.
6
Click [OK] to close the [Booklet Details] dialog box.
7
Set any other print options you require and click [OK].
8
Click [OK] or [Print] to send the print job.
The print job is printed as a booklet.
To Next Page
Loading...
