3 PRINT FUNCTIONS (Windows)
102 Setting up Print Options
[Configuration] tab
The [Configuration] tab allows you to configure options. When any optional unit is installed in this equipment,
set the configuration of the machine on this tab. The [Configuration] tab can be displayed only from the
Printers folder (and not when displaying the properties from the application’s print dialog box).
In order to set the [Configuration] tab, you must access the printer driver properties from the [Devices and
Printers] folder (Windows Vista / Windows Server 2008: [Printer]). For detailed instructions on how to set
the [Configuration] tab, see the following page:
P.74 “Configuring options manually”
1) Model Selection
This sets the model type.
2) Option
This option sets whether the following optional devices are installed.
Automatic Duplexing Unit
Be sure to select this check box to use the equipment.
Drawers
This sets the installation of drawers according to the configuration.
- Drawer 1 — Select this when only Drawer 1 is installed.
- Drawer 1 & Drawer 2 — Select this when Drawers 1 and 2 are installed.
- Drawer 1, 2 & Drawer 3 — Select this when Drawers 1, 2 and 3 are installed.
- Drawer 1, 2 & Drawer 3, 4 — Select this when Drawers 1, 2, 3 and 4 are installed.
P.103 “Drawer Settings”
3) [Drawer Setting]
Sets the paper size and paper type of each drawer. The [Drawer Settings] dialog box appears by clicking
this.
P.103 “Drawer Settings”
4) [Version Information]
Displays the [Version Information] dialog box.
5) [SNMP Settings]
Click this button when you need to verify or change the SNMP settings.
P.104 “SNMP Settings”
To Next Page
Loading...
