5.SCAN FUNCTIONS
Scan to File 155
5 SCAN FUNCTIONS
7
If there are more originals, place the next ones.
When you place originals on the Reversing Automatic Document Feeder (RADF), select “SCAN
NEXT” using or and press [OK]. (Only when “CONTINUE SCAN” is set to “ON”)
When you place an original on the original glass, select “SCAN NEXT PAGE” using or and
press [OK].
Repeat step 7 until all the originals have finished being scanned.
8
If there are no more originals, select “FINISHED” using or . The originals are stored
by pressing the [OK].
If originals remain on the Reversing Automatic Document Feeder after pressing [FINISHED] on the
CONTINUE SCAN screen, remove all the originals. Leaving them may cause a paper jam.
RADF Original Glass
CONTINUE SCAN
SCAN NEXT
FINISHED
NEXT ORIGINAL?
SCAN NEXT PAGE
FINISHED
To Next Page
Loading...
