6.VARIOUS FUNCTIONS
User Functions Menu List 187
6 VARIOUS FUNCTIONS
SCAN
Menu Functions Settings Description
COLOR MODE BLACK, GRAY SCALE, FULL
COLOR
Sets the default setting for the
color mode.
COMPRESS LOW, MID, HIGH Sets the default setting for the
compression ratio.
2-SIDED SCAN SINGLE, DUPLEX Sets the default setting for the 2-
sided scan mode.
ROTATION
Sets the default setting for the
orientation.
BLACK
SETTING
RESOLUTION 600dpi, 400dpi, 300dpi,
200dpi, 150dpi
Sets the default setting for the
resolution when [BLACK] is
selected for the color mode
setting.
ORIGINAL MODE TEXT/PHOTO, TEXT,
PHOTO
Sets the default setting for the
original mode when [BLACK] is
selected for the color mode
setting.
EXPOSURE AUTO, Manual Sets the default setting for the
density when [BLACK] is
selected for the color mode
setting.
GRAY
SETTING
RESOLUTION 600dpi, 400dpi, 300dpi,
200dpi, 150dpi
Sets the default setting for the
resolution when [GRAY SCALE]
is selected for the color mode
setting.
FULL COLOR
SETTING
RESOLUTION 300dpi, 200dpi, 150dpi Sets the default setting for the
resolution when [FULL COLOR]
is selected for the color mode
setting.
ORIGINAL MODE TEXT/PHOTO, TEXT,
PHOTO
Sets the default setting for the
original mode when [FULL
COLOR] is selected for the color
mode setting.
OMIT BLANK PAGE -3 to +3 Sets the sensitivity level to detect
blank pages. The higher the level
is, the more likely the equipment
can detect blank pages. You can
specify the sensitivity level in the
range from -3 to +3.
CONTINUE SCAN OFF, ON Sets whether to continue
scanning when the scanning of
all the originals set on the RADF
is finished.
To Next Page
Loading...
