Toshiba e-studio2809a - Page 209

7.TROUBLESHOOTING
Paper Misfeed 207
7 TROUBLESHOOTING
3
If you cannot see the misfed paper or it is difficult to remove, open the drawer in which
you have loaded paper and remove it.
Be sure that the height of the stacked paper does not exceed the line indicated inside of the side
guides.
4
Close the drawer.
5
Lay down the transfer unit, and then press down the two fuser pressure release levers
(green) until they come to a stop.
Press down the levers fully until they stop.
6
Raise the transport guide.
2
1