Toshiba e-studio2809a - Page 36

1 PREPARATION
34 Preparation 2 - Loading Paper
3
Pull the paper holding lever out, and then load the envelope face down on the bypass
tray.
Place the envelope with its flap side at the front as shown below.
 Do not copy or print on the back of envelopes, otherwise it may cause a paper misfeed or soil
them or the inside of the equipment.
 Printing may be uneven depending on the envelope types.
4
Align the side guides to the edges of the envelope, and then push back the lever.
2
1
2
1