Toshiba e-STUDIO355 - Page 206

e-STUDIO205L/255/305/355/455 © 2009 TOSHIBA TEC CORPORATION All rights reserved
SELF-DIAGNOSIS MODES
2 - 178
9022 General Easy setup production
process flag
ALL 99
<0-99>
SYS Perform this code when
an error occurs during
the easy setup
(unpacking manual
adjustment) and you
want to finish the easy
setup, or when the error
is canceled and you
want to restart the
unpacking manual
adjustment.
0: Unpacking mode
finished (before
unpacking is
started)
1: Auto-toner
adjustment finished
(The message
prompting the
installation of the
toner cartridge is
displayed.)
2: Toner cartridge is
installed
99: All the unpacking
adjustments
finished
Only 0 to 2 and 99 are
available for this code.
1
9051 User
interface
Panel calibration setting
value display
ALL 0
<0-1>
SYS Switches whether the
screen for displaying
panel calibration setting
values is displayed or
not.
0: Disabled (screen
not displayed)
1: Enabled (screen
displayed)
1
Setting mode (08)
Code
Classific
ation
Items
Functi
on
Default
<Acceptable
value>
Boa
rd
Contents
Proce
dure