2
© 2009 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO205L/255/305/355/455
SELF-DIAGNOSIS MODES
2 - 51
1080 Image RGB
conversion
method
selection
Text SCN
(color
)
0
<0-3>
SYS Sets the color space
format of the output
image.
0: sRGB
1: AppleRGB
2: ROMMRGB
3: AdobeRGB
1
1081 Printed
image
SCN
(color
)
0
<0-3>
SYS 1
1082 Photo SCN
(color
)
0
<0-3>
SYS 1
1086 Image Sharpness
adjustment
Text S CN
(color
)
128
<0-255>
SYS The larger the value is,
the sharper the image
becomes. The smaller
the value is, the softer
the image becomes and
the less moire appears.
1
1087 Printed
image
SCN
(color
)
128
<0-255>
SYS 1
1088 Photo SCN
(color
)
128
<0-255>
SYS 1
1675 Image ACS judgment
threshold
SCN 70
<0-255>
SYS The larger the value is,
the more an original
tends to be judged as
black even at the auto
color mode. The smaller
value is, the more it tends
to be judged as color.
1
2083 Image
processi
ng
Transfer cleaning bias
adjustment (positive)
ALL e-STUDIO205L/
255/305:
63
e-STUDIO355/
455:
96
<0-255>
M When the high-voltage
transformer is replaced,
the transfer cleaning bias
needs to be adjusted with
this code.
The larger the setting
value is, the higher the
value of the current
(more positive) is. This
causes a reduction in the
toner adhering to the
transfer roller and an
improvement in the
cleaning performance.
Perform this adjustment
after the process units
(cleaner and developer
unit) have been removed.
When the high-voltage
transformer is replaced,
adjusting with the
following codes needs to
be performed in addition
to this adjustment.
05-205, 05-210, 05-221,
05-234
3
Adjustment mode (05)
Code
Classific
ation
Items
Funct
ion
Default
<Acceptable
value>
Boa
rd
Contents
Proce
dure
To Next Page
Loading...
