Toshiba E-STUDIO520 - Page 213

© 2005 - 2007 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO520/523/600/603/720/723/850/853
ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 187
2
Pickup roller
(3rd drawer)
1328-0,1,2,8 1329 <Default value of code 1328
(e-STUDIO520/600/720/850) or
(e-STUDIO523/603/723/853)>
Sub-codes 0, 2, 8: 0/0/0/0
Sub-code 1: 200,000/200,000/
200,000/200,000
Pickup roller
(4th drawer)
1330-0,1,2,8 1331 <Default value of code 1330
(e-STUDIO520/600/720/850) or
(e-STUDIO523/603/723/853)>
Sub-codes 0, 2, 8: 0/0/0/0
Sub-code 1: 200,000/200,000/
200,000/200,000
Pickup roller
(Bypass feed)
1332-0,1,2,8 1333 <Default value of code 1332
(e-STUDIO520/600/720/850) or
(e-STUDIO523/603/723/853)>
Sub-codes 0, 2, 8: 0/0/0/0
Sub-code 1: 100,000/100,000/
100,000/100,000
Web roller one-way clutch 1338-0 to 8 1339 <Default value of code 1338
(e-STUDIO520/600/720/850) or
(e-STUDIO523/603/723/853)>
Sub-codes 0, 2, 3, 5, 6, 7, 8: 0/0/0/0
Sub-code 1: 450,000/500,000/
575,000/600,000
Sub-code 4: 470,000/470,000/
470,000/390,000
Items
PM management set-
ting <Procedure 4>
*Indicated in 8 digits
Date of previous
replacement
<Procedure 2>
Remarks
07/11