© 2005 - 2007 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO520/523/600/603/720/723/850/853
SPECIFICATIONS/ACCESSORIES/OPTIONS/SUPPLIES
1 - 11
1
1.3 Options
* The finisher (MJ-1027/1028) is necessary for the installation of the hole punch unit (MJ-6003N/E/F/
S) and the inserter (MJ-7001).
* The PCI slot (GO-1050) is necessary for the installation of the scrambler board (GP-1040), the par-
allel interface kit (GF-1140) and the fax board (GD-1170NA/EU/AU).
* The antenna (GN-3010) is necessary to enable the wireless LAN module (GN-1040/1041) and the
bluetooth module (GN-2010).
* Up to 2 antennas (GN-3010) can be connected to the wireless LAN module (GN-1040/1041).
* When the wireless LAN module (GN-1040/1041) and the bluetooth module (GN-2010) are installed
together, only 1 antenna (GN-3010) can be connected to each.
* STAPLE-1700 (100 sheets stapling): 3 cases of 5000 staples in a package
STAPLE-1800 (50 sheets stapling): 3 cases of 5000 staples and one exclusive cartridge in a pack-
age
STAPLE-1900 (50 sheets stapling): 3 cases of 5000 staples in a package
* The Printer kit (GM-1050) or Printer/Scanner kit (GM-2040) does not have a function for printing an
XPS file.
* To enable an XPS file to be printed by the Printer kit (GM-1051) or Printer/Scanner kit (GM-2041),
the Memory (GC-1230) is required to be installed.
* To enable an XPS file to be printed by the Printer ELK (GM-1110) or Printer/Scanner ELK (GM-
2110), the Memory (GC-1230) is required to be installed.
Large Capacity Feeder (LCF) MP-4004L/A
Finisher MJ-1027
Saddle stitch finisher MJ-1028
Saddle stitch finisher (100 sheets stapling) MJ-1029
Staple cartridge STAPLE-700 (for MJ-1027/1028)
STAPLE-1700 (for MJ-1029)
STAPLE-1800 (for MJ-1029)
STAPLE-1900 (for MJ-1029)
STAPLE-600 (for saddle stitch)
Finisher guide rail KN-1017
Hole punch unit MJ-6003N/E/F/S
Inserter MJ-7001
Damp heater MF-6000U/E
Fax board GD-1170NA/EU/AU
Printer kit GM-1050/1051
Printer/Scanner kit GM-2040/2041
Scanner kit GM-4010
Printer ELK GM-1110
Printer/Scanner ELK GM-2110
Scanner ELK GM-4110
Memory GC-1230
Wireless LAN adapter GN-1040/1041
Bluetooth module GN-2010
Antenna GN-3010
Scrambler board GP-1040
Data overwrite kit GP-1060
PCI slot GO-1050
Parallel interface kit GF-1140
07/11
To Next Page
Loading...
Need help?
General
