Toshiba E-STUDIO520 - 3. Setting Items (User); 1. Setting General Functions; 2. Setting Copy Functions; 3. Setting Fax Functions

© 2005 - 2007 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO520/523/600/603/720/723/850/853
ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 39
2
272 LCF feed clutch ON/OFF 3
273 LCF transport clutch ON/OFF 3
274 Gate solenoid ON/OFF 3
276 Tray-up motor-1 ON (1st drawer tray goes up) 2
278 Tray-up motor-1 ON (2nd drawer tray goes up) 2
279 Tray-up motor-2 ON (3rd drawer tray goes up) 2
280 Tray-up motor-2 ON (4th drawer tray goes up) 2
283 Large original exit roller (forward rotation) ON/OFF 3
284 Large original exit roller (reverse rotation) ON/OFF 3
285 Small original exit roller (forward rotation) ON/OFF 3
286 Small original exit roller (reverse rotation) ON/OFF 3
287 Large original exit solenoid ON/OFF 3
288 Small original exit solenoid ON/OFF 3
289 Large original exit roller release solenoid ON/OFF 3
290 Tray lift motor tray-up/down 3
292 Laser unit cooling fan (high speed) ON/OFF 3
293 Laser unit cooling fan (low speed) ON/OFF 3
295 Power OFF mode 4
450 IH board cooling fan (high speed) ON/OFF 3
451 IH board cooling fan (low speed) ON/OFF 3
452 Reverse section cooling fan-1 (front side) ON/OFF 3
454 Reverse section cooling fan-2 (front side) ON/OFF 3
Code Function Procedure