Toshiba E-STUDIO5506AC - The Function List

e-STUDIO5506AC/6506AC/7506AC (Ver01) © 2016, 2017 TOSHIBA TEC CORPORATION All rights reserved
2-69
2. Copier-specific Adjustments
2.16.1 To Adjust the Tint of Colors other than Black
* Both the service technician and the user can perform all adjustments.
(1) Press [IMAGE] on the Control Panel. Press [TWIN COLOR COPY].
Select the Twin-color copy mode from among the twin color copy mode options.
• To select Red and black mode:
Press [RED & BLACK].
• To select the Twin-color selectable mode:
Use steps (a) through (d) to select the Twin-color selectable mode.
(a) Press [TWIN COLOR SELECTABLE].
(b) Press [CHANGE BLACK TO]. Press the button for the desired color.
(c) Press [SECOND COLOR]. Press the button for the desired color.
(d) Press [ENTER].
Use procedure (2).
(2) Press [ADJUST]. Press [+]or [-] for the color to be adjusted, in order to adjust the tint of colors other than
black.
• In the Red and black mode:
• Press [-] to decrease yellow and [+] to enhance magenta, in order to enhance the tint of red.
• Press [+] to enhance yellow and [-] to decrease magenta, in order to decrease the tint of red.
• In the Twin-color selectable mode:
Press [+] to enhance the tint of the color or [-] to decrease it.
* Note that the adjustment is not possible if the combination of the selected colors in the Twin-color
selectable copy mode is "Black and Black" or "Color other than black and Color other than black".
* Press [DETAIL]. The tint of the color can be adjusted according to the density area (low-, medium- or
high-density area).

Caution after the adjustment
Nothing in particular.