Toshiba E-STUDIO5506AC - To Adjust Smudged Black Text and Black Thin Lines

e-STUDIO5506AC/6506AC/7506AC (Ver01) © 2016, 2017 TOSHIBA TEC CORPORATION All rights reserved
3-144
3. Printer-specific Adjustments
3.29 To Adjust Smudged Black Text and Black Thin Lines

Explanation
Black text or black thin lines sometimes become thicker and thus are smudged. Use this mode to perform
printing while adjusting the thickness of black text or black thin lines.

Procedures
* The service technician must perform all adjustments.
Change the setting values in [05 ADJUSTMENT MODE] to adjust smudged black text and black thin lines.
* The setting codes to be changed differ between the adjustment of the image quality in full color or twin color
printing and that for black-and-white printing. Select the adjustment procedure corresponding to the original
type to be printed.
To adjust the image quality in full color or twin color printing
("Auto", "Color" or "Twin Color" is selected from among the "Color" options on the PCL6 or PS3 or XPS
printer driver. Or "Auto", "Color" or "Twin Color" is selected from among the "Color Type" options on
Macintosh.)
* The "Color" options are available in the "Basic" tab on the PCL6, PS3 and XPS printer drivers. The "Color
Type" options are available in the "Color Settings 1" menu in the print dialog box on Macintosh.
<Notes>
This adjustment is available only when the resolution is 600dpi.
Before adjustment
After adjustment