e-STUDIO5506AC/6506AC/7506AC (Ver01) © 2016, 2017 TOSHIBA TEC CORPORATION All rights reserved
i
Table of Contents
0H
1. General Adjustments – Copying, Printing and e-Filing (Output from Box)
1.1 To Obtain a Darker Image............................................................................. 1-1
1.2 To Adjust the Density on a Solid Colored Image ........................................... 1-6
1.3 To Achieve the Image Quality Most Suitable for the Paper Used (To eliminate
blur and graininess from an image) ............................................................. 1-11
1.4 To Minimize Variations in the Image Quality under the Operating Conditions
(To optimally program image quality control) .............................................. 1-16
1.5 To Correct Out-of-Registration Colors ........................................................ 1-24
1.6
To Adjust Printing Positions on Front and Back Sides in the duplex mode
....... 1-28
2. Copier-specific Adjustments
2.1 To Copy Text Clearly (To eliminate faint, smudged or blurred text) .............. 2-1
2.1.1 To Adjust the Copy Image Quality in the Black Mode .................................... 2-2
2.1.2 To Adjust the Copy Image Quality in the Full Color Mode ............................. 2-6
2.2 To Closely Match the Color Balance of the Original .................................... 2-11
2.3 To Improve the Reproducibility of Gray ....................................................... 2-16
2.4 To Copy in Vivid Colors .............................................................................. 2-19
2.5 To Make the Pale Area of the Original Look Darker and Sharper (To improve
the highlight reproducibility) ........................................................................ 2-24
2.6 To Eliminate the Background Color ............................................................ 2-28
2.6.1 To Adjust the Copy Image Quality in the Black Mode .................................. 2-29
2.6.2 To Adjust the Copy Image Quality in the Full Color Mode ........................... 2-31
2.7 To Avoid Copying the Image Seen through the Back of a Page Printed on Thin
Paper .......................................................................................................... 2-34
2.7.1 To Adjust the Copy Image Quality in the Black Mode .................................. 2-35
2.7.2 To Adjust the Copy Image Quality in the Full Color Mode ........................... 2-37
2.8 To Eliminate Moiré ...................................................................................... 2-39
2.9 To Copy Sharply (To enhance sharpness) ................................................. 2-43
2.10 To Make Photo Edges Look Softer ............................................................. 2-46
2.11 To Make Solid Filled Bold Text (Logo) Highly Colored ................................ 2-51
2.11.1 To Adjust the Copy Image Quality of a Black Logo ..................................... 2-52
2.11.2 To A
djust the Copy Image Quality of a Colored Logo .................................. 2-54
2.12 To Sharply Contrast the Hues of Highlighters on the Copy ......................... 2-56
2.13 To Obtain a Good Color Balance on Thick Paper ....................................... 2-60
2.14 To Obtain Smooth Gray-Scale Photo Images ............................................. 2-64
2.15
To Change the Threshold in Auto Color Mode (To change the threshold between
the Full Color mode and the Black mode to meet the user’s needs)
................ 2-65
2.16 To Adjust the Twin-Color Copy Image Quality ............................................ 2-68
2.16.1 To Adjust the Tint of Colors other than Black .............................................. 2-69
2.16.2 To Adjust the Boundary between Black and Colors other than Black .......... 2-70
2.16.3
To Adjust the Tint of Specified Colors for Twin-Color or Single-Color Copying
....... 2-71
2.17 To Adjust the Image Quality Scanned from the DF ..................................... 2-73
2.18 To Program Frequently Used Copy Settings (To Use Custom Mode) ....... 2-76
2.18.1 To Adjust Custom Mode Settings in Black Mode ......................................... 2-76
2.18.2 To Adjust Custom Mode Settings in Full Color Mode .................................. 2-77
2.19 To Copy While Erasing Shadow Outside of Image ..................................... 2-78
2.20 To Avoid Copying Blank Page of Original Scanned with DF ....................... 2-79
2.21 To Obtain Image in Even Density Level ...................................................... 2-81
2.22 To Improve Reproducibility of Red Seal Color ............................................ 2-83
2.23 To Reduce Streaks at Scanning with DF .................................................... 2-84
To Next Page
Loading...
