Toshiba E-STUDIO5506AC - To Change Gray Tone

e-STUDIO5506AC/6506AC/7506AC (Ver01) © 2016, 2017 TOSHIBA TEC CORPORATION All rights reserved
2-86
2. Copier-specific Adjustments
2.24 To Change Gray Tone
Before adjustment
After adjustment

Explanation
The gray tone can be changed when an original including gray color is copied.

Procedures
The service technician must perform the adjustments.
(1)Select [08 SETTING MODE] and change the setting value of the code [7614] to enable the User custom
mode for the full color.
For details, refer to “2.18.2 To Adjust Custom Mode Settings in Full Color Mode”.
Base mode: [Text/Photo] (Setting value: 1)
(2)Select [05 ADJUSTMENT MODE] and change the setting value for the code [7690].
[05] Code
Recommended
value
Acceptable
value
range
Default Remarks
05-7690 3 0 to 4 0
0: Default (Gray reproduction level is
equivalent to the Text/photo mode.)
1: Gray reproduction level is equivalent to
the Photo mode.
3: The gray tone becomes a more bluish
one.

Caution after the adjustment
Nothing in particular

Remarks
The setting content of the values “2” and “4” is the same as that for the default (“0”).